录井核磁共振技术在实际应用中的问题与探讨

doi:10.3969/j.issn.1672-9803.2019.02.001

录井工程 ›› 2019, Vol. 30 ›› Issue (2): 1-5.doi: 10.3969/j.issn.1672-9803.2019.02.001

• 研究与探讨 • 下一篇

录井核磁共振技术在实际应用中的问题与探讨

李怀军(), 马树明, 苑传江, 经俭波, 刘媛, 程晶

中国石油西部钻探地质研究院(克拉玛依录井公司)

收稿日期:2019-04-22 出版日期:2019-06-25 发布日期:2019-07-08
作者简介:
作者简介李怀军高级技师,1986年生,2008年毕业于天津工程职业技术学院石油与天然气地质勘探专业,现任中国石油西部钻探地质研究院(克拉玛依录井公司)技术监督,从事地化录井技术研究及新技术推广工作。通信地址:834000 新疆克拉玛依市南新路2号录井工程公司。电话:(0990)6840419。E-mail:348704526@qq.com

Problem and discussion of mud logging NMR technology in practical application.

Huaijun Li(), Shuming Ma, Chuanjiang Yuan, Jianbo Jing, Yuan Liu, Jing Cheng

Mud Logging Engineering Company, 2 Nanxin Road, Karamay City, Xinjiang, 834000, China

Received:2019-04-22 Online:2019-06-25 Published:2019-07-08

摘要/Abstract

摘要：

近年来,核磁录井分析技术在储集层解释评价中发挥了重要作用,核磁共振录井技术主要用于钻井现场快速评价储集层物性及流体性质,通过提供储集层的孔隙度、渗透率、可动流体饱和度、束缚流体饱和度等参数,为进一步分析判断储集层流体性质提供依据,为油田勘探开发提供优质的解释评价服务。但该技术在实际应用中发现了一些问题:一是岩样孔隙内剩余流体性质的判断;二是含油饱和度测量后油相信号超出饱和状态信号,出现数据溢出现象。针对第一种情况,通过对岩样进行三次扫描,可以较好地解释孔隙内剩余流体的性质;就第二种情况经过实验研究,针对不同的原因分别提出了相应的对策。

关键词: 核磁共振技术, MnCl₂溶液, 含油饱和度, 数据溢出

Abstract:

In recent years, nuclear magnetic mud logging analysis technology has played an important role in reservoir interpretation and evaluation. Nuclear magnetic resonance (NMR) mud logging technology is mainly used for rapid evaluation of reservoir physical properties and fluid properties in drilling site, which can provide reservoir parameters such as porosity, permeability, movable fluid saturation, irreducible fluid saturation, etc., provide basis for further analysis and judgment of reservoir fluid properties, and provide high-quality interpretation and evaluation services for oilfield exploration and development. However, some problems have been found in the practical application of this technology. One is the judgment of residual fluid properties in pores of core sample, the other is that the oil phase signal exceeds the saturation state signal after oil saturation measurement, and the data-overrun occurs. For the first case, the properties of residual fluid in pores can be well explained by scanning core samples three times. Based on the experimental study of the second case, the corresponding countermeasures were put forward for different reasons.

Key words: NMR technique, MnCl₂ solution, oil saturation, data-overrun

中图分类号:

TE132.1

李怀军, 马树明, 苑传江, 经俭波, 刘媛, 程晶. 录井核磁共振技术在实际应用中的问题与探讨[J]. 录井工程, 2019, 30(2): 1-5.

Huaijun Li, Shuming Ma, Chuanjiang Yuan, Jianbo Jing, Yuan Liu, Jing Cheng. Problem and discussion of mud logging NMR technology in practical application.[J]. Mud Logging Engineering, 2019, 30(2): 1-5.

图/表 10

图1

图2

图3

图4

表1

表2

图5

图6

表3

图7

参考文献 6

[1]	金永君,艾延宝. 核磁共振技术及应用[J]. 物理与工程,2002,12(1):47-48.
	JIN Yongjun,AI Yanbao.NMR technology and its application[J]. Physics and Engineering,2002,12(1):47-48.
[2]	赵常俊,吴乐乐. 核磁共振技术在石油行业中的应用[J]. 山东化工,2016,45(3):86-89.
	ZHAO Changjun,WU Lele.The application of nuclear magnetic resonance (NMR) technology in the petroleum industry[J]. Shandong Chemical Industry,2016,45(3):86-89.
[3]	王振. 核磁共振录井技术的应用分析[J]. 化工管理,2014(26):170.
	WANG Zhen.Application analysis of NMR logging technology[J]. Chemical Enterprise Management,2014(26):170.
[4]	肖秋生,朱巨义. 岩样核磁共振分析方法及其在油田勘探中的应用[J]. 石油实验地质,2009,31(1):97-100.
	XIAO Qiusheng,ZHU Juyi.Analysis method of rock NMR and its application in oilfield exploration[J]. Petroleum Geology and Experiment,2009,31(1):97-100.
[5]	倪卫平. 试论核磁共振录井技术在油田开采中的应用[J]. 中国新技术新产品,2013(2):105.
	NI Weiping.Discussion on the application of NMR logging technology in oilfield exploitation[J]. China New Technologies and New Products,2013(2):105.
[6]	邓鑫,王鑫,刘玥,等. 核磁共振录井发展现状与定性识别油水层方法[J]. 天然气与石油,2016,34(1):74-78.
	DENG Xin,WANG Xin,LIU Yue,et al.Development status of NMR logging and qualitative identification method of oil and water layer[J]. Natural Gas and Oil,2016,34(1):74-78.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

浓度/ (mg·L^-1)	孔隙信号/ (n·a^-1)	孔隙度/%
5 000	54 968.60	21.32
8 000	15 289.85	6.32
10 000	8 122.44	2.93
12 000	4 310.27	1.43
15 000	144.87	0
18 000	154.11	0
20 000	155.05	0

时间/h	1号岩样信号 /(n·a^-1)	2号岩样信号 /(n·a^-1)
0	10 536.2	10 325.9
24	5 290.7	4 718.5
48	4 636.9	2 838.9
72	4 310.6	2 107.4
96	4 230.8	2 060.8
120	4 095.9	1 885.1
144	3 957.1	1 560.6
168	3 939.2	1 529.6
192	3 931.2	1 509.3
216	3 884.1	1 563.3

时间/h	岩样信号/(n·a^-1)
24	585.13
48	579.03
72	574.03
96	576.63
120	570.13
144	560.63
168	553.53

[1]	王飞龙. 低渗油田可动油储集层流体性质评价方法——以鄂尔多斯盆地红河油田为例[J]. 录井工程, 2019, 30(4): 74-78.
[2]	向斌. 红台构造带轻质油储集层核磁共振录井解释评价方法[J]. 录井工程, 2017, 28(01): 55-60.
[3]	谭判占蓉朱建昌彭雄黄卫国周慧鹏 . 录井滴水试验与储集层产液性质的差异性分析[J]. 录井工程, 2016, 27(01): 63-66.
[4]	姜丽孙广文孙博伦. 莫里青断陷油水层综合解释评价方法及其应用[J]. 录井工程, 2015, 26(02): 59-61.
[5]	冷云飞段宏臻李振林. 东坪地区复杂天然气储集层解释评价方法[J]. 录井工程, 2014, 25(04): 42-45，75.
[6]	何庆铭. 核磁共振录井技术在松辽盆地西部斜坡区萨尔图油层组的应用[J]. 录井工程, 2013, 24(04): 24-27.
[7]	吐洪江韩国生田野姜绍芹陈丽谢天虎 . 岩石热解热失重法计算砂岩储集层含油饱和度[J]. 录井工程, 2013, 24(03): 16-18.
[8]	王洪伟. 水平井录井精细评价方法在扶余地区的应用[J]. 录井工程, 2011, 22(02): 47-51.
[9]	申辉林朱伟峰刘美杰. 核磁共振录井t₂谱截止值确定方法及其适应性研究[J]. 录井工程, 2010, 21(02): 39-42,47.
[10]	李芳邹筱春冯艳丽王芹. 核磁共振录井含油饱和度的测量与校正[J]. 录井工程, 2009, 20(01): 11-14.
[11]	王守军慈兴华王志战王晓惠. 核磁共振录井技术在胜利油田的应用[J]. 录井工程, 2007, 18(01): 24-27，62.

录井核磁共振技术在实际应用中的问题与探讨

Problem and discussion of mud logging NMR technology in practical application.

RichHTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 6

相关文章 11

Metrics

本文评价

推荐阅读 10